Furuno 3D Sonar Visualizer F3D-S, Руководство оператора

Страница: 25 / 32

3. LOWER USER MENU
20
3.3 How to Start and Stop Data Recording
This software records the echo data of the FSV-25. The size of the echo data depends on the
range setting. When the range is set to 1000 m, approximately 13 MB of the echo data can be
saved per one transmission.
Note: When your main objective is data recording, connect a recording device and save the data
on the recording device.
1. Click to show the lower user menu.
2. Click to start recording of the echo data.
The capture icon appears above the record icon. Click to save still images. One still
image, that is generated from the echo data acquired by the transmission, is saved per one
transmission along with recording of the echo data. To stop saving still images, click .
To set the save destination folder, see section 3.5.
Note: When the capacity of the folder is full, recording of the echo data is stopped and the
caution message "Recording has stopped due to insufficient space." appears.
3. To stop recording, click .
4. Click to hide the lower user menu.
3.4 How to Replay the Echo Data
You can replay the recorded echo data.
1. Click to show the lower user menu.
2. Click to open the replay menu.
3. Referring to the table below, click an icon to execute each function.
Icon Description
Opens the [Open] dialog box. Select the file and click [Open].
Replays the first file.
Replays the previous file of the last played file.
Continuously replays the files from the previous file of the last played file in reverse order.
Stops continuous replay.
Continuously replays the files from the next file of the last played file in order.
Replays the next file of the last played file.
Replays the last file.