1-5
Mounting
The display unit is mounted in a hanger. The
mount itself can be installed either overhead,
on a bulkhead, or on a tabletop. The drawing
below gives the recommended clearances
and mounting dimensions for this unit. You
can use the mount itself as a template for
locating the mounting screw holes. Although
the unit is lightweight (4.8 kilograms), rein-
force the mounting place, if necessary.
1. Mark the screw locations by using the
hanger as a template.
2. Drill five pilot holes for the hanger.
3. Install the hanger using the screws sup-
plied as the installation materials.
4. Fit the knob bolts and washers to the dis-
play unit.
5. Install the display unit in the hanger.
Tighten the knob bolts securely.
300 mm
(11.79'')
223 mm
(8.78'')
WASHER
KNOB
BOLT
232 mm
(9.13'')
276 mm
(10.87'')
224 mm
(8.82'')
196 mm
(7.72'')
80 mm
(3.15'')
80 mm
(3.15'')
70 mm
(2.76'')
160 mm
(6.30'')
80 mm
(3.15'')
5-7.5
MOUNTING HOLES
Figure 1-9 Display unit, outline drawing
