6
Installation
English
Step 1. Mount the Wall Plate on
Wall
WARNING:
Do not drill into mortar joints.
Be sure to drill holes centered within studs or
bricks.
A. Mounting on solid concrete or concrete
block wall
1. Choose a proper height for your TV. Level
the wall plate paper template on wall with
a level and tape it in place.
Note: This is the drilling templat
e to be pasted
on wall for drilling holes easily an
d safely.
Drill here
(24" apart)
Drill here
(24" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(24" apart)
Drill here
(24" apart)
Drill here
(16" apart)
Drill here
(16" apart)
24 in. (609.6 mm) apart
16 in. (406.4 mm) apart
Paper Template
2. Using a ⁵∕16" (8 mm) drill bit, drill
4 mounting holes based on the hole
marking on paper template .
Note: This is the drilling templat
e to be pasted
on wall for drilling holes easily an
d safely.
Drill here
(24" apart)
Drill here
(24" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(24" apart)
Drill here
(24" apart)
Drill here
(16" apart)
Drill here
(16" apart)
24 in. (609.6 mm) apart
16 in. (406.4 mm) apart
3. Remove the wall plate paper template.
Insert a concrete anchor (C) into each
hole and ensure it is flush with the
concrete surface.
4. Place the wall plate against the wall and
use 4 lag bolts (A) with the washers (B) to
attach the wall plate onto wall.
Tighten the lag bolts securely and ensure
the wall plate level by using the built-in
bubble level on the mount.
Caution:
Do not over-tighten these bolts.