Turn right (clockwise) to tighten
Page 5 of 6
Enlarged
Enlarged
#A x 8 pcs
#D x 8 pcs
#E x 8 pcs
#B x 2 pcs
#D x 2 pcs
#E x 2 pcs
I.
Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#E) onto the
bolt (#A) and then the flat washer (#D)
onto the SAME bolt (#A), in that order.
II.
Insert two bolt assemblies through the
right and left side of the pre-drilled
holes of the headboard (#1) using the
Allen wrench (#H) but expose about
½” of the bolts’ threads.
III.
Mount the brackets of the side rails
(#2) onto the bolts (#A) on each side
of the headboard (#1). Make sure all
the washers are in the FRONT of the
brackets. Use the Allen wrench (#H)
to tighten the bolts with the two parts
together.
IV.
Repeat the process I through III above
to assemble the other ends of the side
rails (#2) onto the footboard (#3).
.
I.
Align the two slat support legs (#7) with the pre-drilled holes of the central
support rail (#4).
II.
Prepare 2 bolt assemblies by inserting FIRST the lock washer (#E) onto the
bolt (#B) and then the flat washer (#D) onto the SAME bolt (#B), in that
order.
III.
Insert the two bolt assemblies through the pre-drilled holes of the central
support rail (#4) using the Allen wrench (#H) to lock them in with the slat
support legs (#7).
Turn right (clockwise) to tighten
Содержание CM7057F
Страница 2: ...Page 2 of 6...
