Furniture of America CM4321C, Руководство по сборке

Страница: 5 / 8

I. Carefully place the table top (#1) facing down on a protected surface.
II. Align the brackets (#G) assembled on the leg A (#2) AND the leg B (#3)
with the pre-drilled holes on the bottom of the table top (#1).
III. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#C) onto
the bolt (#A) and then the flat washer (#D) onto the SAME bolt (#A), in that
order.
IV. Insert the bolt assemblies through the pre-drilled holes on the brackets
(#G) and secure those bolts using the Allen wrench (#E) to lock them with
the table top (#1).
V. Align the 4-way bracket (#F) onto the center of the leg A (#2) and the leg B
(#3).
VI. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#C) onto
the bolt (#A) and then the flat washer (#D) onto the SAME bolt (#A), in that
order.
VII. Insert the bolt assemblies through the pre-drilled holes on the 4-way
bracket (#F) and secure those bolts using the Allen wrench (#E) to lock
them with the leg A (#2) AND the leg B (#3).
VIII. Carefully turn the table upright. Place the glass top (#4) onto the table top
(#1). Make sure the table is rested on a flat surface and it does not feel
loose or wobbly. If it does, double check that the bolts/screws are secured
and properly tighten.
Page 5 of 8
Turn right (clockwise) to tighten
#A x 12 pcs
#C x 12 pcs
#D x 12 pcs
#F x 1 pc
ASSEMBLY IS COMPLETED
#1