I. Insert the front legs (#3) into the front corners of the seat (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#B) onto the bolt (#E)
then the flat washer (#A) onto that SAME bolt (#E). Secure using the Allen wrench (#F).
Note: Make sure to insert the leg
supports as you install the legs.
Insert a wood screw (#G) into each pre-drilled hole on the
leg supports and secure using the Phillips screwdriver.
ASSEMBLY IS COMPLETED
*Left and right are determined by
facing the front of the chair at an
upright position.
