Field
Description
•
*
(default value): No channel bundling, only one B-
channel is ever available for connections.
•
-%
: Static channel bundling.
•
1)%
: Dynamic channel bundling.
Number of B Channels Select how many B channels your device should use.
Field in the Dial Numbers menu
Field
Description
Entries
Add new entries with Add.
Fields in menu Dial Number Configuration (appears only for Entries = Add)
Field
Description
Mode
Only if Entries =
0
Defines whether Call Number should be used for incoming or
outgoing calls or for both. Possible values:
•
>
(default value): For incoming and outgoing calls.
•
%$
: For incoming calls, where your connection partner
dials in to your device.
•
?$$
: For outgoing calls, where you dial your connec-
tion partner.
The calling party number of the incoming call is compared with
the number entered under Call Number.
Call Number
Enter the connection partner's numbers.
Fields in the IP Options menu
Field
Description
OSPF Mode
Select whether and how routes are propagated via the interface
and/or OSPF protocol packets are sent.
Possible values:
•
&&
(default value): OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
17 WAN
Funkwerk Enterprise Communications GmbH
284
bintec Rxxx2/RTxxx2
