Funkwerk elmeg t444 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 84

Funkwerk elmeg t444 Скачать руководство пользователя страница 49

Commissioning the phone part

Phone number plan

When you start up your PABX for the first time a number of settings are already pre-configured (default settings). This includes the internal
numbers. This means that you can place calls immediately after switching on your PABX.

Internal numbers:

·

Numbers 20...29 are set for the »Connection of ISDN terminal devices« on the internal ISDN bus.

·

The internal numbers 10…13 are provided for analog ports, numbers 30…39 for CAPI and numbers 40…43 for DSL.

·

Internal service number: The internal number 55 has been assigned as the service number.This number is used to
provide access for the PC to the PABX system via the internal ISDN connection. You can configure the PABX via the
internal ISDN connection and a PC with an ISDN card.

·

External service number: An MSN or, with a point-to-point access, a direct dial-in number is assigned to the internal
service number 55 during PC configuration. This »external service number« is the only access possible for configu-
ring »Follow me« and »Room monitoring« from an outside location.

·

Team 00: In the initial state the numbers 10, 11 and 20 are entered and enabled for Team 00 in the day/night call allo-
cation.

Default setting

·

The external ISDN connection is set to point-to-multipoint access.

·

The four-digit PIN1 (password) is set to

0000

·

The six-digit PIN2 (password) is set to

000000

·

Assignment of an external ISDN connection is made by entering

0

.

·

The internal ISDN bus is configured as »S0 bus, internal«.

·

The switchable call mode for Team 00 is set to »Day mode«.

·

The group call is set for »simultaneous«.

·

The switching privilege for teams is configured for no terminal device.

·

All users are in Pick-up group 00.

·

Accepting (pick-up) of a call is possible for all terminal devices.

·

All subscribers can use the telephone directory.

·

No terminal device authorized for SMS reception.

·

The analog connections are configured for telephones that use DTMF dialing and a flash key (200 ms).

·

The active terminal devices are authorized for international calls.

·

The dial range is not configured.

·

The number of the caller is displayed (caller ID).

·

The B number is transmitted to the caller.

·

Call waiting for a/b terminal devices has not been configured.

·

No entries in telephone directory.

Commissioning the phone part

45

«
...
47
48
49
50
51
...
»

Содержание elmeg t444





















































































Отзывы:

Нет отзывов