Funkwerk elmeg t444, Руководство по эксплуатации, Страница: 31 / 84

PABX Settings
Activating and deactivating call signaling for analog terminal devices
You can activate/deactivate the ringing of your analog terminal devices for internal, external or all calls. You will still have use of all of the ot-
her functions for the terminal device. When the caller places a call he/she will hear the ringing signal. When you lift up the handset during a
call (you can not hear the call) you will be connected with the caller.
Deactivating call signaling for analog terminal devices(Inhibiting calls ON)
b *57 0
/
1
/
2 q a
Lift up
handset
all calls /
only external calls /
only internal calls
Ack.
signal
Replace
handset
Activating call signaling for analog terminal devices(Inhibiting calls OFF)
b #570 q a
Lift up
handset
Ack.
signal
Replace
handset
Teams
Teams are groups of persons who work together to achieve a set goal. Normally, this means that all of the members of a team can be reached
at a common number for external and internal calls. In the PABX this means that a number can be specifically assigned to each team of tele-
phones / terminal devices, allowing all team members to be reached at all times for external and internal calls.
In PC configuration you can assign up to eight internal numbers or one number for external call forwarding to each of the 10 possible teams.
These teams can, in turn, be allocated to the external MSN. A team number can be specified in PC configuration for the team for internal
team calls.
When a subscriber dials the number for a team the team name is shown in the display of his/her phone while the call is in process. If a team
member answers the call, then his or her name will be displayed.
If the MSN is dialed by an external party, or the team number by an internal user, all of the assigned terminal devices are called. You can enter
various terminal devices (e. g. telephone, fax group 4) for the teams; the calls are signaled in accordance with their specific service ID.
Teams can also be called during an ongoing inquiry call or on call forwarding. It is also possible to forward a call to a
team.
Call to busy team member (»Busy on Busy«)
If a member of a team is making a call you can decide whether further calls are to be signaled for this team (PC configuration setting). If the
function »Busy on busy« has been configured for this team any further callers making calls to this team will receive the »busy« signal.
Enabling / Inhibiting a member's phone within a team
Let's assume you are leaving the phone range and wish to disable your telephone for call signaling.
You can disable your telephone for call signaling in a team or in all teams and enable it later. Enabling or inhibiting is always conducted si-
multaneously in the day/ night team call allocation. If your phone is disabled in a team no further team calls will be signaled at your phone.
If all team member's phones are disabled in the day/night team call allocation, the calls for this team will be signaled at the terminal devices
of Team 00. The caller will hear a busy signal if no terminal device has been enables for call signaling in Team 00 either. In the initial state the
numbers 10.11, 20 and 20 are entered and enabled for Team 00 in the day/night call allocation.
The specific internal number must be assigned to the corresponding team to enable or inhibit a telephone within a
team.
PABX Settings
27