Frame Relay
bintec User’s Guide
29
Multiprotocol over Frame Relay Submenu
4
to set up a connection to another host in the LAN or to a connection partner, but
doesn’t know its hardware address (MAC address), it sends an ARP request as
broadcast
to the network. If Proxy ARP is activated on the gateway
and
the desired target host can be reached e.g. via a host route, the gateway
an-
swers the ARP request with its own hardware address. The
data packets
are sent to the gateway, which then forwards them to the desired hos
t.
The
A
DVANCED
S
ETTINGS
menu consists of the following fields:
Note
Verify that Proxy ARP is activated on the LAN-side, too.
Field
Description
RIP Send
Enables RIP packets to be sent via the inter-
face to the WAN partner. Possible values: see
table “Selection options for RIP Send and RIP
Receive,” on page 31.
RIP Receive
For receiving RIP packets via the interface to
the WAN partner. Possible values: see
“Selection options for RIP Send and RIP
Receive,” on page 31.
IP Accounting
For generating accounting messages for e.g.
TCP
UDP
and ICMP sessions. Pos-
sible values:
on
,
off
(default value).
Back Route Verify
Activates Back Route Verification for the inter-
face to the WAN partner. Possible values:
on,
off
(default value)
.
