Funkwerk bintec R4100, Руководство пользователя

Страница: 27 / 36

Frame Relay bintec User’s Guide 25
Multiprotocol over Frame Relay Submenu
4
Destination IP Address Only for R
OUTE
T
YPE
= Host route or Network
route .
IP address of the destination host or LAN.
Netmask Only for R
OUTE
T
YPE
= Network route .
Netmask for D
ESTINATION
IP-A
DDRESS
.
Partner / Interface Only for N
ETWORK
= WAN without transit
network .
Displays the connection partner. Field cannot
be modified.
Mode Only for N
ETWORK
= WAN without transit
network .
Defines when the connection partner is to be
used. Possible values see
table “Mode
selection options,” on page 26.
Metric The lower the value, the higher the priority of
the route (possible values
0 ... 15 ).
Default value is 1 .
Source Interface Interface over which the data packets reach the
gateway.
Default value is don’t verify .
Source IP-Address IP address of the source host or LAN.
Source Mask Netmask for S
OURCE
IP-A
DDRESS
.
Type of Service (TOS) Possible values: 0
..
255
as bit string.
TOS Mask Bit mask for T
YPE OF
S
ERVICE
.
Protocol Defines a protocol. Possible values:
don’t verify, icmp, ggp, tcp, egp, pup, udp,
hmp, xns, rdp, rsvp, gre, esp, ah, igrp, ospf,
l2tp.
Default value is don’t verify .
Field Description