Frame Relay
bintec User’s Guide
17
Multiprotocol over Frame Relay Submenu
4
This menu should only be used by sites receiving multiple DLCIs from their
Frame Relay service provider. Depending on the number of DLCIs and type of
service being received, use this menu to define the appropriate data rates.
Configuration is carried out in
FR
➜
M
ULTIPROTOCOL
OVER
F
RAME
R
ELAY
➜
ADD/EDIT
➜
V
IRTUAL
C
IRCUITS
➜
ADD/EDIT
.
The menu consists of the following fields:
Table 4-2:
V
IRTUAL
C
IRCUITS
menu fields
4.2
IP Submenu
The
IP
submenu is described below.
The
FR
➜
M
ULTIPROTOCOL
OVER
F
RAME
R
ELAY
➜
ADD/EDIT
➜
IP
submenu is
used for making IP settings for the selected connection partner.
Field
Description
Source Interface
Here you select the Frame Relay interface for
this route.
Source DLCI
Defines the DLCI used on this interface.
Possible values:
16 .. 1007
.
Default value:
16
.
Burst committed (Bc)
Defines the maximum amount of data that is
guaranteed to be transferred by the service
provider.
Default value:
64000
.
Burst excess (Be)
Defines the amount of additional data that is
uncommitted by the service provider.
Default value:
0
.
Committed Information
Rate (CIR)
Defines the physical throughput of this inter-
face.
Default value:
64000
.
