Field
Description
to be responded to for the specified connection partner.
Possible values:
•
Inactive
(default value): Deactivates Proxy ARP for this
connection partner.
•
Active or Idle
: Your device only responds to an ARP re-
quest if the status of the connection to the connection partner
is
Up
or
Dormant
. In the case of
Idle
, your device only re-
sponds to the ARP request; the connection is not set up until
someone actually wants to use the route.
•
Active Only
: Your device responds to an ARP request only
if the status of the connection to the connection partner is
Up
(active), i.e. a connection already exists to the connection
partner.
10.1.7 IP Pools
In the IP Pools menu a list of all IP pools is displayed.
Your device can operate as a dynamic IP address server for PPP connections. You can
use this function by providing one or more pools of IP addresses. These IP addresses can
be assigned to dialling-in connection partners for the duration of the connection.
Any host routes entered always have priority over IP addresses from the address pools.
This means if an incoming call has been authenticated, your device first checks whether a
host route is entered in the routing table for this caller. If not, your device can allocate an IP
address from an address pool (if available). If address pools have more than one IP ad-
dress, you cannot specify which connection partner receives which address. The ad-
dresses are initially assigned in order. If a new dial-in takes place within an interval of one
hour, an attempt is made to allocate the same IP address assigned to this partner the last
time.
Use the Add button to set up new IP pools.
10 WAN
Funkwerk Enterprise Communications GmbH
288
bintec R1xxx/R3xxx/R4xxx
