Field
Description
Description
Enter a name for uniquely identifying the WAN partner. The first
character in this field must not be a number and no special
characters or umlauts must be used either.
User Name
Enter the user name.
Password
Enter the password.
Always Active
Select whether the interface should always be activated.
The function is activated with
Enabled
.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle Timeout Only if Always up is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
0
to
3600
(seconds).
0
deactivates the
short hold.
The default value is
600
.
Fields in the AUX IP Mode and Routes menu
Field
Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
Get IP Address
(default value): Your device is dynamic-
ally assigned an IP address.
•
Static
: You enter a static IP address.
•
Provide IP Address
: Your device dynamically assigns an
IP address to the remote terminal.
Default Route
Select whether the route to this connection partner is to be
Funkwerk Enterprise Communications GmbH
10 WAN
bintec R1xxx/R3xxx/R4xxx
283
