SNMP shell
Log into the SNMP shell as follows:
(1)
Enter your user name e.g.
admin
, and confirm with Return.
(2)
Enter your user password e.g.
funkwerk
, and confirm with Return.
Your device logs in with the input prompt, e.g.
TR200bw:>
. The login was successful. You
are now in the SNMP shell.
To leave the SNMP shell after completing the configuration, enter
exit
and press Return.
4.3 Configuration options
This chapter first offers an overview of the various tools you can use for configuration of
your device.
You can configure your device in the following ways:
• Funkwerk Configuration Interface
• Setup Tool for experts
• SNMP shell commands
The configuration options available to you depend on the type of connection to your device:
Types of connections and configurations
Type of connection
Possible types of configuration
LAN
Funkwerk Configuration Interface , shell commands
Serial connection
Shell command
Therefore, several types of configuration are available for each type of connection.
Note
To change the device configuration, you must log in with the user name
admin
. If you
do not know the password, you cannot make any configuration settings. This applies to
all types of configuration.
Funkwerk Enterprise Communications GmbH
4 Access and configuration
bintec R1xxx/R3xxx/R4xxx
105
