Funkwerk artem ComPoint Butterfly, Руководство пользователя, Страница: 63 / 118

The ComPoint in the AP Mode
4-13
• Beacon Period
Indicates the time intervals (measured in milliseconds) at which a
beacon is sent. The default value is 100.
• DTIM Interval
This value specifies the interval for the Delivery Traffic Indication
Message (DTIM). The DTIM field is a countdown field which
informs the clients via the window on the next broadcast or multicast
transmission. If the clients are operated in the power-saving mode,
they will wake up in time and will receive the data. The default value
is 2. The value can be configured from 1 to 65535.
• Nitro Mode
By activating this function, you can achieve higher transmission
speeds for 802.11g via frame bursting. Several packets are transmitted
in sequence without waiting periods. Particularly effective in 11b/g
mixed operation.
• Repeating
Allows direct communication between wireless clients connected to
the same ComPoint. If repeating is deactivated, the wireless clients
logged on at this ComPoint will not be able to exchange data with
each other. This feature can be used to achieve a higher degree of
security if no client of the wireless cell is to have direct contact to
other clients in the same wireless cell.
• Powersave Buffering
If you are using clients with activated power-saving mode, activate
this function. Multicasts are then buffered and sent in dependence on
the DTIM interval.
• Radio On
Is active by default and means that the radio activity of the ComPoint
is on. To deactivate the radio activity of the ComPoint, uncheck the
box. It can still be addressed via the Ethernet interface.
• Enable Configuration Over WLAN
The configuration of the ComPoint via the WLAN interface is deacti-
vated by default. This setting offers additional protection against mis-
use, since communication, and thus configuration, are only possible
via cable.