Funktel TETRA FT4, Руководство по эксплуатации

Страница: 95 / 152

Operation

Messaging/Text messages
95
Sending an SDS text message
When you have finished composing a text message or adapting a template, you can
transmit the message. They are transmitted in plain text, using the Short Data
Service (SDS).
Prerequisite:
 The text message to be transmitted is composed, see section „Creating an SDS
text message“ (p. 89) or section „Composing an SDS text message from a tem-
plate“ (p. 91).
 The SDS E
DITOR
O
PTIONS
or SDS T
EMPLATE
O
PTIONS
window is displayed.
Perform the following steps:
1. If required, select the recipient from the Contact list , All Groups or from the
defined Group Folders :

Using the ‹
CURSOR KEYS
(9) › highlight the C
ONTACT LIST
menu item and select
by using the ‹
RIGHT MENU KEY
(8) › . Using the cursor keys, highlight the desired
recipient in the contact list and select it by using the right menu key. To send
the message, press the
‹
LEFT MENU KEY
(7) › .

Using the ‹
CURSOR KEYS
(9) › highlight the A
LL GROUPS
menu item and select
by using the ‹
RIGHT MENU KEY
(8) › . Using the cursor keys, highlight the desired
recipient group and select it by using the right menu key. To send the message,
press the
‹
LEFT MENU KEY
(7) ›.

Using the ‹
CURSOR KEYS
(9) › highlight the G
ROUP
F
OLDER
menu item and
select by using the ‹
RIGHT MENU KEY
(8) › . Using the cursor keys, highlight the
group folder and select it by using the right menu key. Using the cursor keys,
select the desired recipient group and press the right menu key to access the
target number input field. To send the message, press the

‹
LEFT MENU KEY
(7) › .