Funktel f.airnet D5 Series, Руководство по эксплуатации, Страница: 126 / 160

126
Other functions D5 / FC5 Series
Localisation tracking in the alarm condition
After a personal alarm has been triggered, the handset remains in the alarm
condition until the alarm is acknowledged by the control centre, the reset au-
thorisation has been granted and the alarm has been ended on the handset. If
the handset receives changing ILB/blue.tooth identifiers in this condition, for
example because the handset user is fleeing from danger after triggering the
alarm, the handset likewise sends these identifiers to the control centre. In this
way, the control centre can trace the escape route during the alarm condition.
Note regarding operation with an I55 PBX:
If the handset is in a call condition at the beginning of localisation tracking, the
"Call drop after 1 (2 or 3) ILB/blue.tooth IDs" determines if the call is to be
dropped immediately (1 = after receipt of an identifier) or only after the set
number of received ILB//blue.tooth identifiers, in order to transmit these identi-
fiers to the control centre.
Guard Control
The "Guard Control" of the Security handset recognises the ILB/blue.tooth
identifier of a localisation beacon that it passes and then has the following op-
tions:
 The handset signals the receipt of each ILB/blue.tooth identifier by means
of a beep, vibration and illumination of the display (“Signalling” parameter)
on the handset, as well as showing the received identifier in the display
("ILB/blue.tooth display duration" parameter) and
 reports all ILB/blue.tooth identifier to the control centre ("Identifiers to be
transmitted = all" parameter).
 only reports identifiers less than 1000 to the control centre
("ILB/blue.tooth identifiers < 1000" parameter). This setting allows the
placement and evaluation of selected localisation beacons for guard
control.
 reports ILB/blue.tooth identifiers together with timestamp to control cen-
tre (“Use timestamp (DoIP only)” parameter)”.