6
EN
PREPARATION FOR USE
Antenna Connection
1)
Insert the RF cable plug into the ANT. IN jack at the rear of
this TV.
2)
Plug this unit into an AC outlet.
3)
The STANDBY/POWER indicator on the front panel lights
red, then press
STANDBY-ON
on the control panel or the
remote control to turn the unit on.
•
PROG.
(
+/–
or
/
) can also be used to turn the unit on.
External Connection
[HDMI CONNECTION]
This is the best method to connect this TV to video devices with
the HDMI output jack, such as DVD player with HDMI output
jack, etc. It can minimize the deterioration of image quality.
Use the HDMI cable (commercially available) for connection.
Connect the HDMI output jack of your video device to the
HDMI1-IN or HDMI2-IN jack of this unit.
<When your video device has the DVI output jack…>
1)
Connect the DVI output jack of your video device to the
HDMI1-IN jack of this unit. Use the HDMI cable
(commercially available).
2)
Connect the audio output jacks of your video device to the
AUDIO IN jacks of the unit.
Note:
•
This TV accepts 480i / 480p / 576i / 576p / 720p
(50 Hz) / 720p (60 Hz) / 1080i (50 Hz) / 1080i (60
Hz) video signals, and 32 kHz / 44.1 kHz / 48 kHz
audio signals.
•
This TV accepts only 2 channel audio signals (LPCM).
•
You need to select “PCM” for the digital audio output
of the device you connect or the HDMI audio setting.
Audio sometimes makes no sound if you select
“Bitstream”, etc.
To ANT. IN jack
Rear of this TV
RF cable (not supplied)
VHF/UHF
MIXER
VHF
UHF
HDMI OUT
Rear of this TV
To HDMI-IN jack
To HDMI output jack
HDMI cable
(not supplied)
Note:
•
This TV accepts 480i / 480p / 576i / 576p / 720p
(50 Hz) / 720p (60 Hz) / 1080i (50 Hz) / 1080i
(60 Hz) video signals.
•
Audio signals are converted to an analogue signal from
the digital if you make a connection above.
“HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
The “HD ready” Logo is a trademark of EICTA.
DVI OUT
AUDIO OUT
L
R
Rear of this TV
HDMI cable
(not supplied)
To audio
output jacks
To HDMI1-IN jack
To AUDIO IN
jacks
audio cable (not supplied)
To DVI output jack
A73F0EP_EN.fm Page 6 Monday, July 30, 2007 3:38 PM
