If you do not press any button for about 15 seconds, the display will turn off. The set values are
retained even when the device is disconnected from the mains power supply.
Press
[Mode]
repeatedly until the display shows
‘AUTO’
. The unit now operates in automatic
stand-alone mode.
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Setup]
to then select with
[Up]
|
[Down]
the programme speed from
‘SP01’
(slow) to
‘SPFL’
(fast). Press
[Setup]
to then select with
[Up]
|
[Down]
the strobe frequency from
‘FS01’
(slow) to
‘FS99’
(fast). Press
[Setup]
to then select with
[Up]
|
[Down]
the changing frequency
from
‘n001’
(slow) to
‘n100’
(fast).
Auto mode
Operating
SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW IR
29
LED PAR
