Fun Generation PicoWash 40 Pixel Quad LED, Руководство пользователя

Страница: 39 / 72

Press [DOWN] . The display shows ‘Strobe’ . Press [ENTER] to then select with [UP] and [DOWN] a
value between 010 and 255 for the strobe frequency of the show. Values between 000 and 009
have no function here.
When the display shows the desired value press
[ENTER] to save the settings. To change the
menu item without making changes, press [MODE] . Press [MODE] twice to return to the func‐
tion selection.
7.3 Settings menu
In this menu you can configure the device according your liking. All previous settings are
retained even when you switch the device off and disconnect it from the mains. Press [MODE]
and confirm with [ENTER] to open the settings menu ‘Set Menu’ .
Press [ENTER] to call up the first menu item ‘Reload Default’ . With this function, you can reset
the device to factory default setting. All your previously adjusted settings are thereby being
irretrievably erased.
If you want to enable this function use
[UP] and [DOWN] to select ‘ON’ and confirm with
[ENTER] . If you want to disable this function use [UP] and [DOWN] to select ‘OFF’ and confirm
with [ENTER] .
Strobe
Resetting to factory defaults
Operating
PicoWash 40 Pixel Quad LED
39
Moving Head