16
TECHNICAL MANUAL 2013 - OFF-ROAD
13
14
15
Bring the nipple out from the hole of the rim.
Loosen the magnet-attracting insert from the nipple.
Insert the new spoke inside the flange of the hub.
16
17
18
Manually tighten the spoke on the nipple.
Tighten the nipple with the wrench, holding the spoke
still with the holder, until an adequate tension is
reached.
After tensioning, apply threadlocker between the
nipple and the spoke.
19
20
21
Insert the valve on the rim.
Tighten the sealing ring.
Tighten the closure cap.
MAINTENANCE
