Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Страница: 99 / 234

5-9
Chapter 5 Blood Pressure and Pulse Wave Examinations (CAVI/ABI/TBI): Standard Mode
Measuring CAVI/ABI/TBI
(4-Channel/6-Channel Examination)
Below is the measurement procedure for a 4-channel or 6-channel examination.
If one BPU-100 NIBP/Pulse Wave Unit is added, measurements can be performed on the left and right sides
without switching the cuffs.
Adding two BPU-100 NIBP/Pulse Wave Units makes it possible to measure the toe blood pressure and TBI.
This section describes the procedure for each mode.
• TBI can be measured in 6-channel examination. A toe waveform is displayed in the waveform display and TBI is
displayed in the measurement content and measurement results.
1
Touch [Examination].
2
Touch [PW/BP Exam.].
The preset examination mode will be displayed when
the power is turned ON.
3
Enter patient information.
(Refer to "Chapter
4
Entering Patient Information"
(P4-1) )
If "Section" or "Segment" is set for [PW/BP Exam.] -
[Pulse Exam. Set.] - [Distance Input Method] in the
Settings, enter the measurement sites according to
"Entering Blood Vessel Length" (P5-20) .
Press [START].
Start of
Measurement
Left Side Measurement
(Left Arm/Leg)
CAVI Check
(If “ON” is set)
ABI
Measurement
Right Side Measurement
(Right Arm/Leg)
Pause: 10 sec.
Waveform Acquisition
Brachium/Ankle/Toe
Save/Send
File
Print
Color Report
Examination Result
Display
End of
Measurement
Pause: 5 sec.
(Can be changed.)
Pause: 5 sec.
(Can be changed.)
TBI
Measurement
BP Measurement
(Right/Left Arm,
Right/Left Toe)