Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Страница: 78 / 234

3-6
Chapter 3 Pre-Examination Preparations
Attaching the Toe Cuff (6-Channel Examination)
This device incorporates a function for avoiding too much pressure on the toe during toe cuff attachment (toe cuff attachment
assist function).
1
Use the correct toe cuff and toe cover
for the measuring site.
Apply the toe cover to the big or index toe.
2
Switch the display to the [PW/BP Exam.] display and touch [Assist Toe Cuff]. The cuff
should be attached such that the hose faces towards the heel of the foot. The cuff is
fan-shaped. Its shorter end should be positioned at the base of the toe. Wrap the cuff
along the root of the toe above the toe cover.
If the toe cuff assist function is used, the air bag will contain a small amount of air before it is wrapped around the toe.
Firmly wrap the cuff around the toe in this condition. When wrapped, the air is exhausted from the air bag to provide an
adequate wrapping.
Finally, check that there is no gap between the cuff and the toe.
Set "Toe Cuff Attachment Guide" to "No" in the BP Exam. Setting if not using the toe cuff attachment guide.
The toe cuffs and toe cuff covers are optional and need to be purchased separately.
• Be careful not to wrap the toe cuff around the toe too hard. The cuff may restrict the blood flow
resulting in hemostasis.
• Do not wrap the toe cuffs too loosely or at an angle. Otherwise, the cuff may burst or give
inaccurate measurements.
• Do not reuse the same toe covers for more than one patient.
The toe cuff attachment guide is activated by touching the [TOE GUIDE] function button on the
display. This function operates while "Cuff assistant function running" is displayed.
T
CAUTION
Position Model Cuff color Toe circumference
(mm)
Toe cover
Big toe CUF-139M2 Blue 65-90 OA-459M
Second toe CUF-139S2 Brown 50-65 OA-459S