Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 299 / 349

15-1
Chapter 15 Setup Item/Default Value Patient Admit/Discharge
Chapter 15 Setup Item/Default Value
This section lists selection, default setting, and backup status for each setup item.
The following indicates the selection, default setting and backup status for each setup item.
REFERENCE
 The <Setting at Discharge> column indicates the following status.
 <No Change> : Settings will be retained even after the patient is discharged.
 <Default>: Settings will be initialized to factory default settings when the patient is
discharged.
 <Admit Setup>: Settings will be changed to the settings made for "Admit Setup" under
"Pre-Set Menu" when the patient is discharged.
 <-> or item without <Setting at Discharge>: These items are not the setting for each
patient and will not be affected by the discharge process.
Patient Admit/Discharge
Alarm Setup
Item Description Default
Setting at
Discharge
ID Numeric, Alphabet, Symbol (20 characters) Blank Default
Patient Name Numeric, Alphabet, Symbol (16 characters) Blank Default
Birth Date Birth Date Blank Default
Age 0 to 150 years or 0 to 999 days 0 year Default
Height 0 to 300 0.0cm Default
Weight 0 to 350 0.0kg Default
BSA 0 to 9.99 0.0m
2
Default
Admit Date Blank Blank Default
Bed Name The set bed name will be displayed, or <Bed name
unselected> will be displayed. No selection
Default
Patient Classification Adult, Child, Neonate Adult No Change
Sex Male, Female No selection Default
Nurse Team Red, Orange, Yellow, Yellow-green, Green, Light Blue,
Blue, Purple (Colored Block) Not registered.
Default
Pacemaker Used, Not Used Not Used Default
Item Description Default
Setting at
Discharge
System Alarm Suspend, ON Suspend -
Each Parameter Refer to "Admit Setup" under "Initial Settings" on Chapter 8 "Setup Item/Default
Value" of Maintenance Manual. Admit Setup