manualshive.com logo in svg

Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Поделиться
Скачать
Fukuda DYASCOPE 8000 Series Скачать руководство пользователя страница 247

13-17

Chapter 13  Menu Items

Night Mode

Night Mode

The night mode for the DS-LANIII network bed and the TCON bed can be turned ON or OFF on this equipment.
The night mode is a function to decrease the screen brightness and alarm volume when turning OFF the light of the 
ward or when the patient is asleep, etc.
The brightness and alarm volume settings during night mode needs to be preprogrammed on the bedside monitor.

      NOTE

The night mode can be set only for the DS-LANIII network bed and the TCON bed.

1

Press the [Menu], [Night Mode] ("Function") keys.

The "Night Mode" menu will be displayed.

For the bed in night mode, [ON] key will be displayed in blue, and for the bed in normal monitoring mode, 
[OFF] key will be displayed in blue.

2

Press the [ON] or [OFF] key for the bed to change the mode.

3

Press the [Set] key.

When changing to night mode, a confirmation window will be 
displayed.
Press the [OK] key to enter into night mode.

When turning OFF the night mode (when [OFF] key is pressed), the 
night mode confirmation window will not be displayed.

4

The same setting can be applied to all beds.

[All Beds ON]: The night mode will be set to all beds.

[All Beds OFF]: The normal monitoring mode will be set to all beds.

2

3

4

Содержание DYASCOPE 8000 Series






























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды