Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации, Страница: 241 / 349

13-11
Chapter 13 Menu Items Bed Transfer/Bed Exchange
By performing central monitor communication setup, bed transfer/exchange among several central monitors can be
performed through the TCP/IP network.
CAUTION

When a bed transfer procedure is performed, all setup data for the new bed will be updated.
The data for the DS-LAN bed, LW-T bed, and the same data monitored on other central
monitor will be initialized.
 If the bed transfer/exchange is performed for the DS-LAN bed, the GAS alarm settings will
be backed up or initialized depending on the settings for "Backup at Discharge" on the
bedside monitor.
 When using the EMR link function, bed transfer/exchange cannot be performed.
However, bed transfer/exchange can be performed when the EMR link is offline.
NOTE
 Perform settings for the "Central Monitor Comm." in advance. (Initial Settings > External
Device > Network)
(

Maintenance Manual "Central Monitor Communication" P2-23)
1
Press the [Menu], [Bed Transfer] ("Function") keys.

The "Bed Transfer" screen will be displayed.
Details
Bed Transfer Bed Exchange
Original New Original New
Patient Information Admit Settings Discharge *
1
Transfer Transfer Transfer
Alarm Alarm Settings Discharge *
2
Transfer Transfer Transfer
Print Settings Print Settings Discharge *
3
Transfer*
7
Transfer*
7
Transfer*
7
Review Data
Graphic Trend
Discharge *
1
Transfer*
6
Transfer*
6
Transfer*
6
Tabular Trend
Full Disclosure Waveform
Recall
ST
Delete or
Transfer*
4
Delete or
Transfer*
4
Delete or
Transfer*
4
12-Lead Analysis
Hemodynamics
Nurse Call Setup Nurse Call Settings Discharge *
2
No Change*
5
No Change*
5
No Change*
5
Initial Settings
When PHS nurse call system is used
Bed Name Settings Initialize Initialize Initialize Initialize
*
1
: The data will be initialized or deleted.
*
2
: The initial settings at admittance will be applied.
*
3
: The settings will be backed up.
*
4
: The data will be deleted if between different central monitors, and the data will be transferred if within the same central monitor.
*
5
: The settings will not change and the same settings will be applied after bed transfer/exchange.
*
6
: If the bed transfer is performed within the same central monitor, the data will be transferred, and if the bed transfer is performed
between the different central monitors, the original data can be monitored via TCP/IP network.
*
7
: If the bed transfer is performed within the same central monitor, the settings will be transferred, and if the bed transfer is
performed between the different central monitors, the settings will not transfer.