Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 234 / 349

13-4
Chapter 13 Menu Items Display Configuration for Individual Bed
Numeric Data/Waveform
The numeric data and waveforms to be displayed for the individual bed can be selected. The numeric data box size
can be also set.

Numeric Data Selection
1
Press the [Change] key for "Numeric Data".

The "Numeric Data Selection" window and numeric data box display area will be displayed.
2
Numeric Data Box Size
 The numeric data box can be assigned to the area outlined in blue. By
selecting multiple areas, the numeric data box can be enlarged.
 By pressing the selected area again, the selection will be cancelled.
 To restart from the beginning, press the [Reselect Area] key.
 For the "12-Lead" layout, HR numeric data box and 12-lead user key will
be automatically assigned to 6 boxes from the top and cannot be
changed. (shown on right)
 The selectable box size differs depending on the parameter.
(

"Numeric Data Box Size Range" P17-12)
3
Parameter Selection
 Select the parameters to be displayed.
4
Finalizing the Setting
 Press the [Set] key to finalize the settings for numeric data box display configuration.
 To set other parameters, repeat the procedure from step 2 to 4.
NOTE
 The selected parameter may not be displayed depending on the numeric data box size. In
2
4
3
2