Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации, Страница: 203 / 349

10-13
Chapter 10 Waveform Review Full Disclosure Waveform
displayed in blue.
2
Specify the print range.
On the compressed waveform display area, the print range starts from the point where it is first pressed
and ends at the point where it is pressed next.
 The print range will be displayed in light blue.
 When the end point of the print range is finalized, [Enlarge]/[12-Lead]/[Cancel] keys will be displayed
beside the end point.
 If the compressed waveform display area is pressed, the end point will be reset to the pressed point.
3
Start the printing.
 Pressing the [Enlarge] key will print the enlarged waveform of the selected print range.
 Pressing the [12-Lead] key will print the 12-lead waveform of the selected print range.
The printing format will be according to the pre-set format. (Menu > Each Bed Setup > Print > 12-Lead)
 Pressing the [Cancel] key will cancel the selected print range.
4
The "Select Area" mode will be cancelled for the following cases.
* When the [Select Area] key is pressed again
* When the display is switched to other display
* When the display is switched to other patient
 When the "Select Area" mode is canceled, the [Select Area] key will change to [Print] key.
6
Report Printing
NOTE
 The report printing function is available only when the laser printer is used.
 On the full disclosure waveform screen, 6 waveforms are displayed, but only the first and
second waveforms can be output on the report printing.
1
Select the "Display Duration" from [2 days] / [3 days] / [6 days] (120 hours of 64 waveforms).
2
Set the "Report Duration".
 For example, if [8 hours] is selected, the waveform starting from 8 hours before the current time will be
printed.
 If [Set Time] is selected, set the start/end time using the / keys.
3
To register the setting, press the [Register] key.
 Gray Area: Full Disclosure Waveform Range
Yellow Green Area: Report Printing Range
1: Full Disclosure Waveform (no data saved): Time range of which full disclosure waveform is not saved
2: Full Disclosure Waveform (data saved): Time range of which full disclosure waveform is saved
3. Report Printing Range: Report Printing Range
4: Printing Range (data saved): Printing range of which full disclosure waveform is saved
5: Printing Range (data not saved): Printing range of which full disclosure waveform is not saved
1
2
3
4 5
6 7