Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 178 / 349

9-12
Chapter 9 Data Review Recall
Recall Condition Setup
The storing condition at alarm occurrence can be set for the recall function. The recall waveform and recall factor
(numeric data, arrhythmia) can be selected.
1
Press the [Setup] key on the recall screen.
 The "Setup" window will be displayed.
2
Recall Waveform Selection
Up to 2 waveforms can be selected for recall
waveform.
1 Time Bar (

"Common Operation" P9-1)
2 List Display Area 18 data will be displayed.
3 Enlarged Display Area Maximum of 2 waveforms (12 seconds each) can be displayed. The waveform can be
dragged to left and right.
When a mouse is used, divider function can be used.
4 Date/Time at Alarm Occurrence, Recall Factor, Numeric Data
5 Nurse Call Mark Indicates that the recall factor was notified to the nurse call system.
6 Latest Recall Factor A diamond shape mark will be displayed for the waveform of latest recall factor.
7 Major Recall Factor Indicates the major recall factor.
8 Date/Time at Alarm Occurrence Indicates the date/time at alarm occurrence.
9 Other Review Data Display (

"Common Operation" P9-1)
1
6
7
8
4
9
2
3
5
2
3