Fukuda CardiMax 2, Руководство по обслуживанию

Страница: 118 / 124

10-2
Chapter 10 Appendix Check List
Check List

Daily Check List
FX-8200
Copy this page for use.
Item Inspection Item Procedure, Measurement, Criteria Judgment
Remarks
(Repair
required)
Appearance
External
Appearance 1 Exterior flaws, cracks,
deformation, rust Check that flaws, cracks, deformation and
rust are not found on the main unit. OK/NG
2 Peeling and dirt on label and
panel Check that peeling or dirt is not found on
the label or the panel. OK/NG
3 Key Check that the keys are not damaged. OK/NG
Accessories 1 Power cable, lead cables, nip
lead Check that flaws and damage are not
found. OK/NG
2 (when used)
Clip electrode, chest electrode Check for dirt, rust. Check that flaws and
damage are not found. OK/NG
3 Printing Paper Check that paper is properly loaded. OK/NG
4 Operation Manual Check that it is stored in specified location. OK/NG
Mechanical Check
Main Unit 1 Key Check that the key operation is smooth. OK/NG
2 Printer Check that the operation is smooth and that
abnormal sound is not heard. OK/NG
Accessories 1 Power cable, lead cables, nip
lead Check for smooth operation without
looseness OK/NG
2 (when used)
Clip electrode, chest electrode Check that no problem is found with the
connection. OK/NG
Electrical Check
Performance 1 Power Supply Check that the display appears when the
power is turned ON. OK/NG
2 Display Check that waveforms are displayed. OK/NG
3 Printing Test Check that waveforms can be printed. OK/NG
4 Printing Speed (25 mm/s) Check that the error for 10 seconds falls
within ±3% range. OK/NG
5 Calibration Voltage Check that the error is within 5%. OK/NG
Overall Judgment OK/NG
Model Name Installation location
Model FX-8200 Date of Inspection
Checked by
Serial Number Approval
Date of Purchase
bl5894
bl5890