Fukuda Denshi IB-7300, Руководство по обслуживанию

Страница: 131 / 146

C A U T I O N
The measurement device must be properly calibrated.
Periodic Check Item
The periodic check items are as follows.
No. Check Item
1 External Appearance
2 Power Supply Part
3 Display/Control/Record
4 ECG
5 Respiration
6 Temperature
7
Non-invasive Blood Pressure
8 Arterial Oxygen Saturation (SpO
2
)
9 Invasive Blood Pressure
10 Cardiac Output (CO)
11 Carbon Dioxide Concentration (CO
2
)
12 External Output (Analog Output)
13 Calibration
14 Electrical
Safety
C A U T I O N
If the safety check reveals that the permissible values have been exceeded,
stop using the equipment. Continued use may lead to physical danger.
Periodic Check Procedure
C A U T I O N
Before the check procedure, back up the setup data, patient data, etc. on the
CF card.
No. Check Item Check Procedure Criteria
1. External Appearance, Accessories
01 Appearance Visually check the exterior for
scratches, cracks, deformation, and
rust. No abnormality should be
found.
02 Cables Visually check all cables for any
damage. No damage should be found.
03 Recording Paper Visually check the loaded condition. There should be no damage,
discoloration.
04 Operation Manual Check if operation manual and
other accompanying documents are
stored at specified place. Should be stored at specified
place.
05 Air Filter Check the date when the cooling
fan air filter was first used (cleaned,
replaced).
→
For instructions on how to
change the air filter, refer to P9-10
“Replacing the Air Filter”.
Should be within three months.
10
－
12