Fukuda Denshi HS-8000 Series, Руководство по обслуживанию

Страница: 122 / 132

10 － 4
●
Daily Check List
Daily Check List
No.
Inspected Date Inspected by Location
Device Type Serial No.
Date of Purchase
Item Details Criteria Judgment
Appearance Visually check the exterior for
scratches, cracks, deformation, and
rust. No abnormality should be found.
□
OK /
□
NG
Installation Check if the unit is leveled.
.
The unit should be leveled and
stable.
□ OK / □ NG
Check if the unit is installed in a place
not susceptible to adverse environment. The environmental condition (ex.
temperature, humidity) of the installed
place should be as specified. The unit
should not be subjected to splashing
water.
□
OK /
□
NG
With BP relay cable and BP
transducer connected, pressing
the BP Zero Balance Switch
should start the zero balance.
□
OK /
□
NG
Pressing the NIBP Start/Stop key
should inflate the NIBP cuff.
□
OK /
□
NG
Functions Turn ON the monitor, and check if it
operates normally.
Connecting the SpO
2
sensor
should light the sensor LED.
□
OK /
□
NG
Cables Visually check all cables for any
damage. No damage should be found.
□
OK /
□
NG
Periodic Check Check the date of previous periodic
check. Should be within 1 year.
□ OK / □ NG
Comment