5-9
Chapter 5 Initial Settings
Measurement Related Setup
Measurement Unit
Set the measurement unit on the "Unit Setup" menu.
1
Press the [Menu], [Setup], [Initial Settings], [Meas.], [Unit] keys.
The "Unit" setup menu will be displayed.
2
Select the CO
2
measurement unit from [mmHg]/[kPa]/
[%].
3
Select the BP and NIBP measurement unit from
[mmHg]/[kPa].
4
When the BP label is CVP (Central Venous Pressure),
select the measurement unit from [mmHg/kPa]/
[cmH
2
O].
5
Select the TEMP measurement unit from [°C] / [°F].
6
Select the ST measurement unit from [mV]/[mm].
7
Select the measurement unit for height and weight from [cm/kg]/[in/lb].
NOTE
When the BP, CVP unit is changed, the tabular/graphic trend data with the previous
measurement unit will be deleted. Also, when the unit is changed, it is necessary to
perform the alarm setup for the new measurement unit.
Other Setup
Set the other measurement related settings.
1
Press the [Menu], [Setup], [Initial Settings], [Meas.], [Other] keys.
The "Other" menu will be displayed.
2
Set the "NIBP Start 5min. early".
If outputting the data to PC or other external
device using the PC communication function of
this system, an error may be generated to the
NIBP measurement time depending on the input
interval of the external device.
This system outputs the data at completion of
NIBP measurement, and if the external device
inputs the data at 60 minutes interval, 60 minutes time lag will occur. By starting the measurement 5 minutes
early, this time lag between the external device can be minimized.
[ON]: When [60min]/[120min] is selected for the measurement interval, the measurement will start 5 minutes
before the set time.
[OFF]: The measurement will not be started 5 minutes early.
2
3
4
5
6
7
2
3
4
5
6
7
Содержание Dynascope 8000 Series
