Fukuda Denshi DynaScope 7000 Series, Руководство по эксплуатации

Страница: 262 / 475

7 － 18
To Display and Record the Zoom Recall Waveform
On the recall list display, pressing one of the recall factors will display its zoom recall waveform.
On the zoom recall waveform display, the recall waveform will be displayed in 25mm/s and by using the
cursor, the data before and after the alarm occurrence can be checked.
Press one of the recall factors on the recall list.
1
Pressing one of the recall factors will display the zoom recall waveform.
2
Move the waveform to the left or the right.
The recall waveform display can be moved to the left or to the right.
Í key will move to the older data, . Î key will move to the newer data.
3
The alarm factor occurred at the same time will be displayed.
Pressing the recall factor key will display the recall factor
occurred at the same time.
QRS Classification
Recall Waveform 1
Recall Waveform 2
Scale in seconds
Measured Data