Fukuda Denshi DSL-8001, Руководство по обслуживанию

Страница: 86 / 150

Communication Setup
To perform bidirectional wireless communications, it is necessary to perform communication setup
in advance.
1 Press the (Menu) key and select "Initial Setup” >"Communication Setup”.
The "Communication Setup" window will be displayed.
2 Select the port for TCON (“COM 1” or “COM 2”).
3 Select [TCON].
TCON Channel and TCON ID Setup
To connect to the TCON network, it is necessary to set up the TCON ID or TCON channel.
Once the TCON ID and TCON Channel are programmed, these will be retained even after the main
power is turned OFF.
C A U T I O N
Users should not perform the TCON setup as malfunction may occur.
1 Press the (Menu) key and select "Initial Setup" >"TCON Setup".
The "TCON Setup" window will be displayed.
2 Select “Channel” on the “TCON Setup” menu.
The “Channel” window will be displayed.
3 Set the TCON Channel number in the range from 1 to 60.
Make sure to set the same TCON channel number in the same TCON group.
Otherwise, communication failure or interference with other TCON group may occur.
When the numeric turns yellow, turn the jog dial to change the setting.
Pressing the jog dial will finalize the setup.
7 － 14