Fujitsu XG2000R, Руководство по оборудованию

Страница: 9 / 75

For Safe Use of the XG2000R
7
• Even when cables are not connected, invisible laser light may be still emitted from the
port openings. To avoid this laser light, never peer into the port openings.
*XFP module which install in XG2000R must be selected from our specified (Please contact
your vendor's representative for the XFP modules specified by us).
Use the power cord attached for this product.
The power cord attached for this product can not be used on any other products.
Power cord for use in other countries must meet the requirements of the country where you
use this product.
Attached power cord is for exclusive use of USA or CANADA.
If you use this product in other country, contact your vendor's representative.
WARNING
Do not use the power cords attached to this product for other products, as there is a
risk of electric shock, fire, and/or damage.
After connecting the peripheral units, connect the XG2000R power cords.
WARNING
• Do not touch the power plug with wet hands, as there is a risk of electric shock.
• Do not damage or remodel the power cords, as this may cause electric shock or
fire. Placing a heavy object on, pulling, excessively bending, twisting, or overheat-
ing a power cord can damage it, and may cause electric shock or fire.
• Do not use the XG2000R with a damaged power cord, a damaged power plug,
and/or a loose socket. Continued use under these conditions may cause a fire.
• If the power plug pins or socket holes are dusty, clean with a dry cloth. Continued
use with a dirty power plug or socket may cause electric shock or fire.
Power Cord Requirements
Connecting the power cords