Fujitsu XG0224, Руководство пользователя

Страница: 349 / 631

XG Series User's Guide Chapter 5 Command Reference
Mode and Terminal Operation Commands
349
5.17.2.6 terminal bell
Function
Set the bell function to sound in the case of an operation error.
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
terminal bell {enable|disable}
Options
enable
Sound a terminal bell in the case of an operation error.
disable
Do not sound a terminal bell in the case of an operation error.
Use Mode
Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation
Set whether or not to sound the terminal bell when:
•
an attempt has been made to enter characters over the maximum number (1022
characters);
•
data has been pasted over the maximum number of characters (1022 characters); or
•
no implementation candidate has been found.
Caution
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
"save" command. This
command setting can be deleted using the "delete" command in the configuration mode.
The contents set in the user class are discarded at logout or execution of the "admin"
command, and they cannot be saved.
Default
It is assumed that the terminal bell is sounded.
terminal bell enable