Fujitsu U9310X, Руководство по эксплуатации

Страница: 84 / 99

Troubleshooting and tips
Executing a reset
If the device no longer responds to your inputs, select one of the following options:
Forced shut down
► Keep the ON/OFF button pressed for at least about 5-10 seconds.
The device will shut down. You can then restart it.
Carry out a system or battery reset
The battery reset button ( "Ports and controls", Page 9 ) is located on the underside of the device.
If the device does not respond, you may have to force the shutdown,
as described in the previous section.
► Disconnect the mains adapter from the device.
► Use a small pointed tool with caution to press the battery reset button.
The device performs a reset, comparable to removing the battery. You can then restart it.
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
► Contact the Service Desk responsible for your country for clari fi cation of the problem:
"http://support.ts.fujitsu.com/contact/servicedesk" . When you do this, please have
ready the ID number and serial number of your system.
80 Fujitsu