Fujitsu T936 Скачать руководство пользователя страница 38

Страница: 38 / 122

Working with the notebook

Using the device as a notebook

Clickpad and Clickpad buttons

Keep the Clickpad clean. Protect it from dirt, liquids, and grease.

Clickpad

Do not use the Clickpad if your

ngers are dirty.

Do not rest heavy objects (e.g. books) on the Clickpad or the Clickpad buttons.

1 = Clickpad

2 = Clickpad buttons

The Clickpad enables you to move the mouse pointer on the screen.

The Clickpad buttons allow the selection and execution of commands. They
correspond to the buttons on a conventional mouse.

You can also deactivate the Clickpad via a keyboard shortcut, so that you cannot move
the pointer on the screen unintentionally (see chapter

"Key combinations", Page 41

Moving the pointer

►

Move your

nger on the Clickpad.

Clickpad

The pointer will move.

Selecting an item

►

Move the pointer to the item you wish to select.

Clickpad

►

Tap the Clickpad once or press the left button once.

The item is selected.

Executing commands

►

Move the pointer to the

eld you wish to select.

Clickpad

►

Tap the Clickpad twice or press the left button twice.

The command is executed.

Fujitsu

Содержание T936



























































































































Результаты поиска

Содержание T936

Отзывы:

Похожие инструкции для T936

Бренды по названию

Популярные бренды

Fujitsu T936, Руководство по эксплуатации

Результаты поиска

Содержание T936

Отзывы:

Похожие инструкции для T936

Бренды по названию

Популярные бренды