Fujitsu Supercomputer PRIMEHPC FX700, Руководство по модернизации и обслуживанию

Страница: 24 / 105

Table 1.4 Work Time Calculation (continued)
Step Included? Description
Start up No The startup time varies greatly depending on the hardware and software
configurations.
Table 1.5 Tools Required and Screws Used for FX700 Maintenance Work
Screwdriver/Bit Insert Screw Usage Type
Phillips
PH2
/ (+) No. 2
To secure top cover
To secure expansion card
To secure slot cover
To secure M.2 SSD
To secure riser module
M3
Phillips
PH2
/ (+) No. 2
To secure chassis
To secure front bezel
M5
Panel
fastener
Phillips
PH2
/ (+) No. 2
To secure BMCIFU M3
Panel
fastener
1.3 Required Tools
When preparing for maintenance work, confirm that you have all the required tools according to the
following table.
The table lists the types of tools and screws.
Chapter 1 Preliminary Work
C120-0090-04EN
1.3 Required Tools
3