Fujitsu STYLISTIC R727 Скачать руководство пользователя

Страница: 78 / 109

Troubleshooting and tips

The printer does not print

Printer doesnot print

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable between the Tablet
PC and the printer is properly connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable between the Tablet
PC and the printer is properly connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The wireless connection to a network does not work

Thewireless connectiontoanetwork does not work

Cause

Troubleshooting

The wireless component is switched off.

►

Switch the wireless component on (see

"Switching the wireless components on and
off", Page 40

The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.

►

Check whether the wireless connection is
enabled by the software.

►

Further information on using the wireless
component can be found in the help files.

The battery discharges too quickly

Battery

Cause

Troubleshooting

The battery is either too hot or too cold. In this
case the battery indicator flashes.

►

Bring the Tablet PC up/down to a normal
operating temperature again.

►

If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.

You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.

►

Use the AC adapter whenever possible.

The maximum brightness may have been set
for the screen.

►

Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under

Control Panel – Hardware and

Sounds – Windows Mobility Center

Fujitsu

Содержание STYLISTIC R727














































































































Результаты поиска

Содержание STYLISTIC R727

Отзывы:

Похожие инструкции для STYLISTIC R727

Бренды по названию

Популярные бренды

Fujitsu STYLISTIC R727, Руководство по эксплуатации

Результаты поиска

Содержание STYLISTIC R727

Отзывы:

Похожие инструкции для STYLISTIC R727

Бренды по названию

Популярные бренды