Fujitsu Streamer DAT 160, Руководство пользователя, Страница: 35 / 41

34
DAT 160 USB
Frequently asked questions about USB drivers Troubleshooting
6.3 Frequently asked questions about USB
drivers
I installed my USB tape drive then powered on my server. Windows didn’t run the Found
New Hardware wizard and the drive appears to work OK. Is there anything I need to do
to make my drive function optimally?
It is likely that Windows installed a driver for the tape drive using Windows
Update when the system booted up. It will not have installed the hp_usbstor
driver, which is recommended, and may be running an out-of-date hpdat driver.
Run the installer package from http://ts.fujitsu.com/support in order to install the
hp_usbstor driver and, if necessary, update the hpdat driver.
I plugged in the USB tape drive with my server powered on and installed drivers when
prompted by the “Found New Hardware” Wizard. Do I need to do anything else?
Run the installer package from http://ts.fujitsu.com/support in order to install the
hp_usbstor driver.
How can I check that my drive is installed correctly?
See “Verifying USB installation for optimum performance” on page 31 “.
6.4 Problems with cartridges
If you experience any problems using branded cartridges, check:
●
The cartridge case is intact and that it contains no splits, cracks or damage.
●
The cartridge has been stored at the correct temperature and humidity. This
prevents condensation. See the insert included with the tape cartridge for
storage conditions.
●
The write-protect switch is fully operational. It should move from side to side
with a positive click.
●
http://ts.fujitsu.com/support for more detailed troubleshooting information.