Fujitsu Streamer DAT 160, Руководство пользователя, Страница: 31 / 41

30
DAT 160 USB
General procedure Troubleshooting
Ê Use the correct media type, for example:
– DAT 160 media with DAT 160 drives.
– DAT 72 media with DAT 72 drives.
– DDS-4 media with DDS-4 drives.
Remember that although tape drives may be able to read earlier-format
media, see see
table 3 on page 24 , the media itself is not backward-
compatible.
– DAT 160 media will be ejected by all drives, other than DAT 160 drive.
– DAT 72 media will be ejected by DDS-4 drives.
– DDS-4 and DAT 72 media will be ejected by DDS-3 drives.
Ê Has the cartridge been write-protected, see “Write-protecting cartridges” on
page 24 .
Ê Clean the tape heads with the cleaning cartridge, see “Cleaning cartridges”
on page 25 . Be sure to use the correct cleaning cartridge.
– DAT 160 cleaning cartridges with DAT 160 tape drives.
– Standard cleaning cartridges with all other DAT tape drives.
Ê
Try the operation again.
Ê
If the problem still occurs, try using a different cartridge.
Ê
If the problem is still there, the problem probably lies with the drive or the
host computer.
Has the drive been moved recently? Have any cables been disconnected
and reconnected? Has the environment changed—unusually hot, cold,
damp or dry? Has there been dust or dirt near the drive. Have reasonable
precautions against static been taken?
The problem could lie with the drive:
Ê Check the cables and connectors.
Ê Clean the tape heads with the cleaning cartridge.
Ê If the problem persists, check the environmental conditions against the
specified limits (refer to
http://ts.fujitsu.com/support ). Perhaps move the
drive to a more suitable site.