Fujitsu SPARC M10-4, Руководство по обслуживанию, Страница: 85 / 514

/BB1/PCI8 PCIE PCIE11
XSCF> showboards -a
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
01-0 00(01) Assigned y y y Passed Degraded
02-0 00(02) Assigned y y y Passed Normal
03-0 00(03) Assigned n n n Passed Faulted
XSCF> deleteboard -c disconnect 01-0
XSCF>
showboards -a
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
01-0 00(01) Assigned n n n Passed Degraded
02-0 00(02) Assigned y y y Passed Normal
03-0 00(03) Assigned n n n Passed Faulted
12.
Execute the showboards command to check the state of the chassis requiring
maintenance.
The BB-ID of the chassis requiring maintenance is indicated by the system board
(PSB) number.
In the following example, [Fault] of PSB 01-0 displays "Degraded", which
indicates that the system board is operating but has some faulty parts.
13.
Execute the deleteboard command to release the chassis requiring
maintenance from the physical partition.
In the following example, PSB 01-0 is released from the physical partition.
14.
Execute the showboards command to confirm that the chassis requiring
maintenance has been released from the physical partition.
In the following example, all of [Pwr], [Conn], and [Conf] of PSB 01-0 display
"n", which indicates that PSB 01-0 has been released.
5.3 Powering Off the Physical Partition
Requiring Maintenance
This section describes the procedure for powering off the physical partition requiring
maintenance. This is applicable if the system has a building block configuration and
has multiple physical partitions.
1.
Log in to the XSCF shell.
Chapter 5 Understanding the Preparations for Enabling Maintenance 61