Fujitsu SPARC M10-4, Руководство по обслуживанию, Страница: 80 / 514

XSCF>
replacefru
------------------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of model which has FRU to be replaced.
1. BB (4s Building Block Model)
2. XBBOX (XB-BOX Model)
------------------------------------------------------------------------------
Select [1,2|c:cancel] :
2
------------------------------------------------------------------------------
Maintenance/Replacement Menu
Please select the chassis including replaced FRU.
No. FRU Status
--- ------------------- --------------
1 /XBBOX#80 Normal
2 /XBBOX#81 Degraded
------------------------------------------------------------------------------
Select [1,2|c:cancel] :
2
5.1.2 Releasing an FRU of the crossbar box from the
system
If the maintenance target is a crossbar box, the following are targeted as FRUs:
■
Chassis of the crossbar box
■
Power supply unit of the crossbar box
■
Fan unit of the crossbar box
■
XSCF unit of the crossbar box
1.
Log in to the XSCF shell.
2.
Execute the replacefru command to display the maintenance menu.
3.
Select the FRU requiring maintenance by specifying it with a numeric key.
In the following example, since the crossbar box chassis itself is selected, "2" is
entered.
4.
Select the FRU requiring maintenance by specifying it with a numeric key.
In the following example, since XBBOX#81 is showing "Degraded" indicating
abnormality, "2" is entered.
5.
Select the FRU requiring maintenance by specifying it with a numeric key.
In the following example, since the XSCF unit is selected as the maintenance
target, "3" is entered.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014 56