Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 30 / 150

18 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Installing the Fujitsu 4Gbps Fibre Channel card
Once you install the Fujitsu 4Gbps Fibre Channel card (SE0X7F11X, SE0X7F12X), the
patch indicated below is required. Access the above-mentioned web site to
download the patch. Follow the installation instructions provided in the README
file for the patch.
Optional cards
■
Single-channel 4Gbps Fibre Channel card (SE0X7F11X)
■
Dual-channel 4Gbps Fibre Channel card (SE0X7F12X)
Required patch
■
FUJITSU PCI Fibre Channel 4.0: 914583-04 or later
General Functionality Issues and
Limitations
This section describes general issues known to exist at this release of the SPARC
Enterprise T5120 and T5220 servers.
Cryptographic Function
The IPsec capability of the on-chip cryptographic accelerator in the UltraSPARC T2
multicore processor is a mechanism that cannot be used unless the IPsec activation
package has been installed. As the IPsec activation package is presently not
supported by Fujitsu, the IPsec function cannot be used in Fujitsu-brand servers.
Cable Management Arm
The SPARC Enterprise T5120 server does not support the cable management arm
(CMA).
The following restrictions apply when using a CMA on SPARC Enterprise T5220
servers:
■
The maximum capacity of the CMA is as follows:
■
AC input power model : 2 AC cables and 6 RJ45 cables
■
DC input power model : 6 DC cables and 6 RJ45 cables