Fujitsu SPARC Enterprise M4000, Справочное руководство, Страница: 193 / 444

setldap(8)
System Administration 207
NAME setldap - configure the Service Processor as a Lightweight Directory Access Protocol
(LDAP) client
SYNOPSIS setldap {
-b
bind} {
-B
baseDN} {
-c
certchain} {
-p
} {
-s
servers} {
-t
user}
-T
timeout
setldap
-h
DESCRIPTION
setldap
(8) allows you to configure the Service Processor as an LDAP client.
Note – The LDAP client supports passwords only in the CRYPT format; UNIX
Crypt or MD5. Therefore the passwords on the LDAP server must support it as
well. Refer to the administration guide for your server for more information.
Privileges You must have
useradm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
-B
baseDN Specifies distinguished name for the search base. Maximum
character length is 128 characters.
-b
bind Sets the identity to use when binding to the LDAP server.
Maximum character length is 128 characters
-c
certchain Imports an LDAP server certificate chain from the remote file
specified in certchain. The certificate chain must be in
PEM
format. Remote files are specified using the standard
scp
syntax, that is,
[user@]host:file.
, and imported using scp.
If the copy requires a user password you will be prompted for
it. Use of this option implicitly enables the use of TLS when
connecting to LDAP. This may be disabled by specifying
certchain as
none
. The certificate chain must be 64 Kbytes in
size or less, and it must be valid or it will be rejected.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-p
Sets a password to use when binding to the LDAP server. You
will be prompted for the password.