Chapter 4 Various Ways to Scan
43
Documents with Different Widths
1
Align the top of the documents.
2
Load the documents in the center of the ADF paper chute
(feeder), and adjust the side guides to fit the widest
document in the batch.
For details, refer to
"Chapter 2 How to Load Documents" (page 27)
.
4.2 Scanning Documents of Different Types and Sizes
ATTENTION
When you scan a mixed batch of documents with different widths, some
of the smaller documents may be skewed or not fed into the ADF. In that
case, separate the documents by their widths, and scan them in
different batches.
HINT
For more details about scanning a mixed batch of documents, refer to
"Conditions for Mixed Batch Scanning" (page 35)
.
ATTENTION
Make sure that all documents are placed over the pick roller.
Otherwise, some documents may be skewed or not fed into the
ADF.
Pick roller's width
Good
Pick roller's width
Bad
