Fujitsu Siemens SCENIC 600, Руководство по эксплуатации

Страница: 45 / 61

System expansions
A26361-K520-Z100-4-7619
37
Changing the floppy disk drive
Open the system unit (see " Opening the system unit ").
Remove the hard disk carrier (see " Installing and removing the hard disk drive ").
1
2
Pull the data and the power supply
connectors from the floppy disk drive.
Remove the screw (1) and take the drive
out of the system unit (2).
Take the new floppy disk drive out of its
packaging.
2
1
Push the drive into the system unit (1), and
fix it with the screw (2).
Plug the data and the power supply
connectors into the floppy disk drive.
Remove the hard disk carrier (see
"
Installing and removing the hard disk
drive ").
Close the system unit (see " Assembling
the system unit ").
i
If necessary, you must adapt the entry for the drive in the Setup menu.